Products / Cryogenic Service
Cryogenic service · −196 °C to −50 °C

Cryogenic Valves

Ball, gate, globe and check valves for LNG, LPG, ethylene and industrial gas service down to −196 °C — built to ISO 28921, BS 6364 and Shell MESC SPE 77/200, and tested in MT's own liquid-nitrogen test facility.

−196 °C to −50 °CISO 28921BS 6364MESC SPE 77/200Emissions ISO 15848-1
MT cryogenic ball valve with long extended bonnet
Cryogenic ball valve · extended bonnet

Where it's used

Applications listed in MT's cryogenic valve catalogue.

Design temperature
−196 °C to −50 °CMinimum design temperature range
Product standards
ISO 28921 · BS 6364Shell MESC SPE 77/200
Fugitive emissions
ISO 15848-1Designed and certified
ServiceLNG plantsLNG terminalsLNG storage tanksLNG carriersLPG plantsEthylene plantsLow-temperature industrial gas

Product range

Sizes and classes as published in MT's cryogenic valve catalogue. Select a valve type for its full data.

Valve typeSize & class
Floating ball valve½"–6" Class 150 / 300 · ½"–2" Class 600 · ½"–1½" Class 900 / 1500
Trunnion mounted ball valve2"–24" Class 150 / 300 / 600 · 2"–12" Class 900 / 1500
Gate valve2"–24" Class 150 / 300 / 600 / 900 / 1500
Globe valve2"–12" Class 150 / 300 / 600 / 900 / 1500
Check valve2"–24" Class 150 / 300 / 600 / 900 / 1500
Dual plate check valveRated to −196 °C — see product page for the full range

Designed for the cold

Common to MT cryogenic valves.

Extended bonnet

Extension length to Shell MESC SPE 77/200 gives enough vaporisation space to keep the stem packing warm enough to operate. The stem-to-bonnet gap is minimised to reduce cold loss.

Drip plate

Stops condensation on the bonnet dripping into the pipe insulation and freezing the line.

Cavity relief

On valves with a body cavity — gate and ball valves — a relief hole faces upstream so trapped medium cannot over-pressurise the cavity.

Stem guide

A sleeve at the lower stem keeps alignment and sealing during operation, avoiding torque rise and stem scoring.

Seat design by valve type

Gate, globe and check: CoCr-alloy hard-faced seats with seating width optimised for cryogenic service. Floating ball: spring-preloaded upstream seat. Trunnion ball: high-performance lip seals on seat, body and stem — single or double piston seat on request.

Low emission

Low-emission gaskets and packing with controlled bolt torque. Designed and certified to the fugitive emission requirements of ISO 15848-1.

Made and tested in-house

From MT's catalogue and company presentation.

Cryogenic treatment

Key components are placed in liquid nitrogen before final machining to improve the low-temperature stability of the austenitic stainless microstructure.

Clean manufacture

Controlled welding, cleaning and assembly in a clean assembly area, so dust particles cannot affect valve performance.

Full cryogenic test rig

Full-size liquid-nitrogen pool, seat-leakage flowmeter, torque test machine and helium leak detector — tested to −196 °C with gas-detection alarm and oxygen monitoring.

MT Cryogenic Valves — product sheetPDF · 4 pages · REV.2020-A Download PDF — no form

Cryogenic enquiry

Send your duty — medium, design temperature, size, class and standard — and our engineering team responds with drawings and lead time.